Animals and vehicles

Unit made of non-impregnated mountain larch, sawn timber heart-separated. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Climbing rungs made of hardwood (ash) Ø 4.2 cm, milled, mortised, secured against twisting. Richter hercules rope, Ø > 20 mm, made of galvanised six-strand steel ropes, covered and glued with polyester yarn, with very good abrasion resistance, firm hold of the sheathing even in the event of punctual damage. Slide made of V2A, side walls glass bead blasted, slide plate thickness 3 mm, handrail tube Ø 42 mm, thickness 2 mm. Professional climbing grips made of a sand/resin mixture with a safe anti-rotation system to prevent unintentional twisting of the grips. Coloured with solvent-free acrylic paint.

Device made of non-impregnated mountain larch, sawn timber heart-cut. Multi-layer board made of three-layer board (3 cm) or five-layer board (4 cm), high dimensional stability, weatherproof glued in accordance with DIN EN 13353:2011 Back and forth movements with sintered metal plain bearings, self-lubricating. Painted with solvent-free acrylic paint. Prefabricated foundation made of reinforced concrete C35/45.

Device made of non-impregnated mountain larch, sawn timber heart-cut. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Multi-layer board made of three-layer board (3 cm) or five-layer board (4 cm), high dimensional stability, weatherproof glued in accordance with DIN EN 13353:2011. Hot-dip galvanised steel chains (V2A / V4A at an extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to replace and easy to shorten. 

Device made of non-impregnated mountain larch, palisades white-peeled, targeted relief cut as an effective countermeasure against severe drying cracks. Multi-layer board made of three-layer board (3 cm) or five-layer board (4 cm), high dimensional stability, weatherproof glued in accordance with DIN EN 13353:2011. Hot-dip galvanised steel chains (V2A / V4A for an extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to replace and easy to shorten. Tail made of polypropylene rope.

Device made of non-impregnated mountain larch, palisades white-peeled, targeted relief cut as an effective countermeasure against severe drying cracks. Multi-layer board made of three-layer board (3 cm) or five-layer board (4 cm), high dimensional stability, weatherproof glued in accordance with DIN EN 13353:2011. Hot-dip galvanised steel chains (V2A / V4A for an extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to replace and easy to shorten. Tail made of polypropylene rope.

Device made of non-impregnated mountain larch, palisades white-peeled. Profiled disc for optimum pressure distribution and protection against water ingress. Swing joint, hot-dip galvanised, with sintered metal plain bearing and integrated swivel. Back and forth movements with sintered metal plain bearing, self-lubricating. Hot-dip galvanised steel chains (V2A / V4A at an extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to replace and shorten. Swing crossbar made of hot-dip galvanised steel. Ergonomically shaped swing seat, soft bumper edge and steel insert.

Tool made of non-impregnated mountain larch, palisades white-peeled, sawn timber heart-cut. Rinds (4-5 cm) white-peeled by hand, natural tree surface remains tangible and tactile. Targeted relief cut as an effective countermeasure against severe drying cracks. Brass bell.

Unit made of non-impregnated mountain larch, sawn timber heart-separated. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Overall construction of the slide made of 2 mm stainless steel, in drawn box form, surface glass bead blasted, without weld seam between slide surface and side panel. Painted with solvent-free acrylic paint.

Unit made of non-impregnated mountain larch, sawn timber heart-separated. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Overall construction of the slide made of 2 mm stainless steel, in drawn box form, surface glass bead blasted, without weld seam between slide surface and side panel. Painted with solvent-free acrylic paint.