Device made of non-impregnated mountain larch, steel uprights. Palisades white-peeled, sawn timber heart-cut. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Cardan joint, hot-dip galvanised, consists of two sintered metal plain bearings, allows free swinging in all directions. Profiled disc for optimum pressure distribution and protection against water ingress. Retractable two-part screws. Back and forth movements with sintered metal plain bearings, self-lubricating. Hot-dip galvanised steel chains (V2A / V4A for an extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to replace and shorten.

Device made of non-impregnated mountain larch, sawn timber heart-cut. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling. Milled tyre, base tube made of C40/50 concrete as prefabricated foundation, concreted.

Device made of non-impregnated mountain larch, posts made of robinia. Palisades white-peeled, with slanted end grain (wood protection measure), sawn timber heart-cut. Richter-Herkul rope, Ø > 20 mm, made of galvanised six-strand steel cables, wrapped and bonded with polyester yarn, with very good abrasion resistance, firm hold of the sheathing even in the event of punctual damage. Cardan joint, hot-dip galvanised, consists of two sintered metal plain bearings, allows free swinging in all directions. Profiled disc for optimum pressure distribution and protection against water ingress. Retractable two-part screws. Back and forth movements with sintered metal plain bearings, self-lubricating. Hot-dip galvanised steel chains (V2A / V4A at extra cost) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to replace and shorten.

Device made of non-impregnated mountain larch, steel uprights. Palisades white-peeled, sawn timber heart-cut. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Cardan joint, hot-dip galvanised, consists of two sintered metal plain bearings, allows free swinging in all directions. Profiled disc for optimum pressure distribution and protection against water ingress. Retractable two-part screws. Back and forth movements with sintered metal plain bearings, self-lubricating. Hot-dip galvanised steel chains (V2A / V4A for an extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to replace and shorten.

Device made of non-impregnated mountain larch, steel uprights. Palisades white-peeled, sawn timber heart-cut. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Cardan joint, hot-dip galvanised, consists of two sintered metal plain bearings, allows free swinging in all directions. Profiled disc for optimum pressure distribution and protection against water ingress. Retractable two-part screws. Back and forth movements with sintered metal plain bearings, self-lubricating. Hot-dip galvanised steel chains (V2A / V4A for an extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to replace and shorten.

Device made of non-impregnated mountain larch, palisades white-peeled, with slanted end grain (wood protection measure), sawn timber heart-cut. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Climbing rungs made of hardwood (ash) Ø 4.2 cm, milled, mortised, secured against twisting. Richter Hercules rope, Ø > 20 mm, made of galvanised six-strand steel rope, covered and glued with polyester yarn, with very good abrasion resistance, firm hold of the sheathing even in the event of punctual damage. S-connector, Ø 8.1 mm, made of high-quality stainless steel, rounded. Profile disc for optimum pressure distribution and protection against water ingress. Retractable two-part screws. Hot-dip galvanised steel chains (V2A / V4A for an extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to replace and shorten. 

Device made of non-impregnated mountain larch, palisades white-peeled, with slanted end grain (wood protection measure), sawn timber heart-cut. Rinds (4-5 cm) white-peeled by hand, natural tree surface remains tangible and tactile. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Climbing rungs made of hardwood (ash) Ø 4.2 cm, milled, mortised, secured against twisting. Richter Hercules rope, Ø > 20 mm, made of galvanised six-strand steel rope, covered and glued with polyester yarn, with very good abrasion resistance, firm hold of the sheathing even in the event of punctual damage. S-connector, Ø 8.1 mm, made of high-quality stainless steel, rounded. Profile disc for optimum pressure distribution and protection against water ingress. Retractable two-part screws. Back and forth movements with sintered metal plain bearing, self-lubricating. 

Device made of non-impregnated mountain larch, palisades white-peeled, sawn timber heart-cut. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Multi-layer board made of three-layer board (3 cm) or five-layer board (4 cm), high dimensional stability, weatherproof glued in accordance with DIN EN 13353:2011. Swivel seat with soft butt edge and steel insert. Cardan joint, hot-dip galvanised, consists of two sintered metal plain bearings, allows free swinging in all directions. Profiled disc for optimum pressure distribution and protection against water ingress. High-quality roller bearings made of chrome steel or stainless steel for rotating elements, low-maintenance, easy to replace, sealed. All steel parts made of stainless steel or hot-dip galvanised, rigging made of tensionable stainless steel cables, stainless steel railing, steering wheel with functioning steering gear, windows in wheelhouse with stainless steel surrounds, both front windows with Plexiglas, hot-dip galvanised steel substructure.

Unit made of non-impregnated mountain larch, with slanted end grain (wood protection measure), sawn timber heart-cut. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Multi-layer board made of three-layer board (3 cm) or five-layer board (4 cm), high dimensional stability, weatherproof glued in accordance with DIN EN 13353:2011. Profiled disc for optimum pressure distribution and protection against water penetration. Retractable two-part screws. Hot-dip galvanised steel chains (V2A / V4A for an extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to replace and shorten. High-quality roller bearings made of chrome steel or stainless steel for rotating elements, low-maintenance, easy to replace, sealed. Hull made of bent 4 mm sheet steel, primed and painted in two colours, all edges in the play area with sufficiently large radii. Sand container made of textile-reinforced rubber belt, 8 mm thick. Brass ship's bell.