Totter Beam

Device made of non-impregnated mountain larch, sawn timber heart-cut. Springs powder-coated red.

Straight Balancing Beam

Device made of non-impregnated mountain larch, palisades white-peeled, targeted relief cut as an effective countermeasure against severe drying cracks.

Rotating Beam with galvanised steel posts

Device made of non-impregnated mountain larch, palisades white-peeled, targeted relief cut as an effective countermeasure against severe drying cracks. High-quality roller bearings made of chrome steel or stainless steel for rotating elements, low-maintenance, easy to replace, sealed. Steel support posts.
 

Balance Blocks, made of larch with steel feet

Device made of non-impregnated mountain larch, sawn timber heart-cut. Squared timbers 18/18 cm. Richter Hercules rope ø > 20 mm, made of galvanised six-strand steel cable and polyester yarn. Retractable two-part screws, self-lubricating back and forth movements.

Balance blocks, steel end frames

Running surface made of non-impregnated mountain larch, sawn timber heart-cut. Adjustable two-part screws. Back and forth movements with sintered metal plain bearings, self-lubricating. Richter Hercules rope, Ø 18 mm, made of galvanised six-strand steel wire rope, covered and bonded with polyester yarn, with very good abrasion resistance, firm hold of the sheathing even in the event of punctual damage. Articulated rope connection. Steel base frame.

Jackstraws See-saw with steel posts

Device made of non-impregnated mountain larch / robinia. Palisades white-peeled, profiled disc for optimum pressure distribution and protection against water ingress. Retractable two-part screws. Targeted relief cut as an effective countermeasure against severe drying cracks.

Balancing rope with PP rope

Device made of oak wood, sawn timber heart-cut. Climbing rungs made of hardwood (ash) Ø 4.2 cm, milled, tapped, secured against twisting. Richter Hercules rope, Ø > 20 mm, made of galvanized six-strand steel rope, covered and glued with polyester yarn, with very good abrasion resistance, firm hold of the sheathing even in the event of punctual damage. Back and forth movements with sintered metal plain bearings, self-lubricating. PP rope with cross connection, Ø 80 mm, with steel core

Balancing Rope with Holding Rope

Device made of non-impregnated mountain larch, palisades white-peeled, with slanted end grain (wood protection measure), retractable two-part screws. Back and forth movements with sintered metal plain bearings, self-lubricating. Standard rope colour: red

Balancing rope made of PP rope with holding rope

Device made of non-impregnated mountain larch, palisades white-peeled, with slanted end-grain section (wood protection measure), Richter-Herkul rope, Ø > 20 mm, made of galvanised six-strand steel cables, sheathed and glued with polyester yarn, with very good abrasion resistance, firm hold of the sheathing even in the event of punctual damage. Fixed rope connection. Profiled disc for optimum pressure distribution and protection against water ingress. Retractable two-part screws. PP rope Ø 80 mm with 12 mm thick galvanised steel core. Standard rope colour: red

<< < 1 2 3 ... > >>