Water and sand

Unit made of non-impregnated mountain larch, sawn timber heart-separated. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Multi-layer board made of three-layer board (3 cm) or five-layer board (4 cm), high dimensional stability, weatherproof glued in accordance with DIN EN 13353:2011. High-quality roller bearings made of chrome steel or stainless steel for rotating elements, low-maintenance, easy to replace, sealed. Coloured with solvent-free acrylic paint.

Units made of non-impregnated mountain larch, sawn timber heart-cut, corner joints with dovetails and prongs.

Beautifully shaped modular system made of non-impregnated mountain larch, in an elaborate and sophisticated design. Sawn timber heart-separated. Corner joints with dovetails and prongs Gutters made of V2A, glass bead blasted Functional elements made of V2A, glass bead blasted, rubber wedge made of industrial rubber.

Beautifully shaped modular system made of non-impregnated mountain larch, in an elaborate and sophisticated design. Sawn timber heart-separated. Corner joints with dovetails and prongs Gutters made of V2A, glass bead blasted Functional elements made of V2A, glass bead blasted, rubber wedge made of industrial rubber.
Water dispenser made of V2A with self-resetting pressure valve.
Pump capacity: adjustable 1-50’; up to 20 litres per release              
Connection pipe: 3/4 inch (device 3/4 inch inside)
Water requirement: min. 15 litres/min 
Water pressure: 2.5 - 5 bar

Units made of non-impregnated mountain larch, sawn timber heart-cut, corner joints with dovetails and prongs. Gutters and functional elements made of V2A glass bead blasted.

Units made of non-impregnated mountain larch, sawn timber heart-cut, corner joints with dovetails and prongs.

Units made of non-impregnated mountain larch, sawn timber heart-cut, corner joints with dovetails and prongs. Gutters and functional elements made of V2A glass bead blasted, flaps made of industrial rubber.

Units made of non-impregnated mountain larch, sawn timber heart-cut, corner joints with dovetails and prongs. Gutters made of V2A glass bead blasted.

Units made of non-impregnated mountain larch, sawn timber heart-cut, corner joints with dovetails and prongs. Gutter made of V2A glass bead blasted.
Water trap made of V2A with self-resetting pressure valve.
Pumping capacity: adjustable 1-50’; up to 20 litres per release
Connection pipe: 3/4 inch (device 3/4 inch inside)
Water requirement: min. 15 litres/min
Water pressure: 2.5 - 5 bar