Webshop Highrise

Unit made of non-impregnated mountain larch, sawn timber heart-separated. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Multi-layer board made of three-layer board (3 cm) or five-layer board (4 cm), high dimensional stability, weatherproof glued in accordance with DIN EN 13353:2011. High-quality roller bearings made of chrome steel or stainless steel for rotating elements, low-maintenance, easy to replace, sealed. Coloured with solvent-free acrylic paint.

Device made of non-impregnated mountain larch, sawn timber heart-cut. Climbing rungs made of hardwood (ash) Ø 4.2 cm, milled, mortised, secured against twisting. Richter hercules rope, Ø > 20 mm, made of galvanised six-strand steel rope, covered and bonded with polyester yarn, with very good abrasion resistance, firm hold of the sheathing even in the event of punctual damage. Fixed rope connection. Standard rope colour: rainbow

Device made of non-impregnated mountain larch, palisades white-peeled, sawn timber heart-cut. Rinds (4-5 cm) white-peeled by hand, natural tree surface remains tangible and tactile. Targeted relief cut as an effective countermeasure against severe drying cracks. 

Device made of non-impregnated mountain larch, palisades white-peeled, sawn timber heart-cut. Rinds (4-5 cm) white-peeled by hand, natural tree surface remains tangible and tactile. Targeted relief cut as an effective countermeasure against severe drying cracks. 

Rotatable, ball-bearing mast made of V2A for aligning the aeolian harp in the direction of the wind. High-quality roller bearings made of chrome steel or stainless steel for rotating elements, low-maintenance, easy to replace, sealed. 

Units made of non-impregnated mountain larch, sawn timber heart-cut, corner joints with dovetails and prongs.

Beautifully shaped modular system made of non-impregnated mountain larch, in an elaborate and sophisticated design. Sawn timber heart-separated. Corner joints with dovetails and prongs Gutters made of V2A, glass bead blasted Functional elements made of V2A, glass bead blasted, rubber wedge made of industrial rubber.

Beautifully shaped modular system made of non-impregnated mountain larch, in an elaborate and sophisticated design. Sawn timber heart-separated. Corner joints with dovetails and prongs Gutters made of V2A, glass bead blasted Functional elements made of V2A, glass bead blasted, rubber wedge made of industrial rubber.
Water dispenser made of V2A with self-resetting pressure valve.
Pump capacity: adjustable 1-50’; up to 20 litres per release              
Connection pipe: 3/4 inch (device 3/4 inch inside)
Water requirement: min. 15 litres/min 
Water pressure: 2.5 - 5 bar

Units made of non-impregnated mountain larch, sawn timber heart-cut, corner joints with dovetails and prongs. Gutters and functional elements made of V2A glass bead blasted.