Car Tyre Swing
Unit made of non-impregnated mountain larch, glulam beams made of non-impregnated larch, glued in accordance with EN 14080:2013, for very large timber cross-sections. Multi-layer board made of three-layer board (3 cm) or five-layer board (4 cm), high dimensional stability, weatherproof glued in accordance with DIN EN 13353:2011. Profiled disc for optimum pressure distribution and protection against water penetration. Hot-dip galvanised steel chains (V2A / V4A for an extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to replace and shorten.
Rotating Plate
Device in steel construction, hot-dip galvanised, filled with rigid foam from below to dampen noise. High-quality roller bearings made of chrome steel or stainless steel for rotating elements, low-maintenance, easy to replace, sealed.
Double Hammock Seat, smaller mesh size
Device made of non-impregnated mountain larch, palisades white-peeled, with slanted end grain (wood protection measure). Richter-Herkul rope, Ø > 20 mm, made of galvanised six-strand steel cables, wrapped and bonded with polyester yarn, with very good abrasion resistance, firm hold of the sheathing even in the event of punctual damage. S-connector, Ø 8.1 mm, made of high-quality stainless steel, rounded. Cardan joint, hot-dip galvanised, consists of two sintered metal plain bearings, allows free swinging in all directions. Retractable two-part screws. Back and forth movements with sintered metal plain bearings, self-lubricating. Chains made of V2A or V4A with high corrosion resistance, short links, without eyelets on the connecting parts, easily replaceable and easy to shorten. Ergonomically shaped swing seat, soft impact edge and steel insert.
Double Hammock Seat
Device made of non-impregnated mountain larch, palisades white-peeled, with slanted end grain (wood protection measure). Richter-Herkul rope, Ø > 20 mm, made of galvanised six-strand steel cables, wrapped and bonded with polyester yarn, with very good abrasion resistance, firm hold of the sheathing even in the event of punctual damage. S-connector, Ø 8.1 mm, made of high-quality stainless steel, rounded. Cardan joint, hot-dip galvanised, consists of two sintered metal plain bearings, allows free swinging in all directions. Retractable two-part screws. Back and forth movements with sintered metal plain bearings, self-lubricating. Chains made of V2A or V4A with high corrosion resistance, short links, without eyelets on the connecting parts, easily replaceable and easy to shorten. Ergonomically shaped swing seat, soft impact edge and steel insert.
Double Hammock Seat with steel posts
Devices made of V2A glass bead blasted. Richter-Herkuleseil, Ø > 20 mm, made of galvanised six-strand steel cable, covered and bonded with polyester yarn, with very good abrasion resistance, firm hold of the sheathing even in the event of punctual damage. S-connector, Ø 8.1 mm, made of high-quality stainless steel, rounded. Cardan joint, hot-dip galvanised, consists of two sintered metal plain bearings, allows free swinging in all directions. Retractable two-part screws. Back and forth movements with sintered metal plain bearings, self-lubricating. Chains made of V2A or V4A with high corrosion resistance, short links, without eyelets on the connecting parts, easily replaceable and easy to shorten. Ergonomically shaped swing seat, soft impact edge and steel insert.
Rotating figure with arms, light blue/blue
Device made of non-impregnated mountain larch, palisades white-peeled, split to dry, screwed back together with a rubber lamella. All visible metal parts made of V2A, glass bead blasted. Coloured with solvent-free acrylic paint. Prefabricated foundation made of reinforced concrete C35/45.
Rotating figure with arms, color purple/pink
Device made of non-impregnated mountain larch, palisades white-peeled, split to dry, screwed back together with a rubber lamella. All visible metal parts made of V2A, glass bead blasted. Coloured with solvent-free acrylic paint. Prefabricated foundation made of reinforced concrete C35/45.
Rotating figure with arms, color red/orange
Device made of non-impregnated mountain larch, palisades white-peeled, split to dry, screwed back together with a rubber lamella. All visible metal parts made of V2A, glass bead blasted. Coloured with solvent-free acrylic paint. Prefabricated foundation made of reinforced concrete C35/45.
Rotating figure with collar, color purple/pink
Device made of non-impregnated mountain larch, palisades white-peeled, split to dry, screwed back together with a rubber lamella. All visible metal parts made of V2A, glass bead blasted. Coloured with solvent-free acrylic paint. Prefabricated foundation made of reinforced concrete C35/45.