Rotating figure with arms, color red/orange
Device made of non-impregnated mountain larch, palisades white-peeled, split to dry, screwed back together with a rubber lamella. All visible metal parts made of V2A, glass bead blasted. Coloured with solvent-free acrylic paint. Prefabricated foundation made of reinforced concrete C35/45.
Rotating figure with collar, color purple/pink
Device made of non-impregnated mountain larch, palisades white-peeled, split to dry, screwed back together with a rubber lamella. All visible metal parts made of V2A, glass bead blasted. Coloured with solvent-free acrylic paint. Prefabricated foundation made of reinforced concrete C35/45.
Rotating figure with collar, light blue/blue
Device made of non-impregnated mountain larch, palisades white-peeled, split to dry, screwed back together with a rubber lamella. All visible metal parts made of V2A, glass bead blasted. Coloured with solvent-free acrylic paint. Prefabricated foundation made of reinforced concrete C35/45.
Rotating figure with collar, red/orange
Device made of non-impregnated mountain larch, palisades white-peeled, split to dry, screwed back together with a rubber lamella. All visible metal parts made of V2A, glass bead blasted. Coloured with solvent-free acrylic paint. Prefabricated foundation made of reinforced concrete C35/45.
Turntable, diameter 320 cm
Unit made of non-impregnated mountain larch, sawn timber heart-separated. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Multi-layer board made of three-layer board (3 cm) or five-layer board (4 cm), high dimensional stability, weatherproof glued in accordance with DIN EN 13353:2011. High-quality roller bearings made of chrome steel or stainless steel for rotating elements, low-maintenance, easy to replace, sealed. Outer ring made of V2A, glass bead blasted. Shell made of glass fibre-reinforced polyester, processed in open form using the fibre injection moulding process.
Turntable
Device made of V2A glass bead blasted, tubes ø 3.4 cm, sawn timber heart-cut. Targeted relief cut as an effective countermeasure against severe drying cracks. High-quality roller bearings made of chrome steel or stainless steel for rotating elements, low-maintenance, easy to replace, sealed.
Single Horizontal Bar
Device made of non-impregnated mountain larch, palisades white-peeled, with slanted end grain (wood protection measure). Profiled disc for optimum pressure distribution and protection against water ingress. V2A glass bead blasted horizontal bar, Ø 3 cm.
Duck Family with pre-cast
Device made of non-impregnated mountain larch, sawn timber heart-cut. Multi-layer board made of three-layer board (3 cm) or five-layer board (4 cm), high dimensional stability, weatherproof glued in accordance with DIN EN 13353:2011. Richter-Herkul rope, Ø > 20 mm, made of galvanised six-strand steel ropes, wrapped and glued with polyester yarn, with very good abrasion resistance, firm hold of the sheathing even in the event of punctual damage. Wobble mechanism and fittings hot-dip galvanised, ground anchor for small animals made of oak wood. Coloured with solvent-free acrylic paint. Standard rope colour: rainbow
Little Fish
Device made of non-impregnated mountain larch, sawn timber heart-cut. Multi-layer board made of three-layer board (3 cm) or five-layer board (4 cm), high dimensional stability, weatherproof glued in accordance with DIN EN 13353:2011 Back and forth movements with sintered metal plain bearings, self-lubricating. Painted with solvent-free acrylic paint. Prefabricated foundation made of reinforced concrete C35/45.