Mobile play

Device made of non-impregnated mountain larch, sawn timber heart-cut. Multi-layer board made of three-layer board (3 cm) or five-layer board (4 cm), high dimensional stability, weatherproof glued in accordance with DIN EN 13353:2011 Back and forth movements with sintered metal plain bearings, self-lubricating. Painted with solvent-free acrylic paint. Prefabricated foundation made of reinforced concrete C35/45.

Units made of V2A glass bead blasted. Swivelling and pendulum-mounted. Walking surface made of multi-glued, weather-resistant screen printing plate, edged with rounded edge profiles. Pendulum bearing with deflection limiter and robust self-lubricating bearing. Cover and edge profiles as well as bearing made of stainless steel Mechanics fully encapsulated to prevent the risk of crushing.

Units made of V2A glass bead blasted, high-quality roller bearings made of chrome steel or stainless steel for rotating elements, low-maintenance, easy to replace, sealed. Easy-to-grip handrail tubes, Ø 33.7 mm, liner made of tear plate.

Unit made of non-impregnated mountain larch, sawn timber heart-separated. Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling through. Glulam beams made of non-impregnated larch, glued in accordance with EN 14080:2013, for very large timber cross-sections. Back and forth movements with sintered metal plain bearings, self-lubricating. Heavy, torsion-free construction with hot-dip galvanised fittings. Contact surfaces, guided on V2A rails, with brass edge protection and additional rubber lip as clamping protection. Steel base frame.

Devices made of V2A glass bead blasted. High-quality roller bearings made of chrome steel or stainless steel for rotating elements, low-maintenance, easy to replace, sealed. Rotating plate made of aluminium chequer plate, installed flush with the floor, Ø 2.30 m All tubes Ø 42 mm Roof made of fabric-reinforced plastic foil, standard colour yellow Steel foundation frame.

Bouncing surface made of textile-reinforced rubber belt 8 mm, air spring with whistle for pentatonic tuning in groups. Base plate and anchor tubes hot-dip galvanized.

Device made of non-impregnated mountain larch, palisades white-peeled, with slanted end grain (wood protection measure). Short posts made of hot-dip galvanised steel tubes. Profiled disc for optimum pressure distribution and protection against water ingress. Rubber belt, double steel-reinforced, total thickness approx. 11 mm, virtually indestructible. High-quality roller bearings made of chrome steel or stainless steel for rotating elements, low-maintenance, easy to replace, sealed. 

Devices made of steel. Rubber belt, double steel-reinforced, total thickness approx. 11 mm, virtually indestructible. High-quality roller bearings made of chrome steel or stainless steel for rotating elements, low-maintenance, easy to replace, sealed.

Device made of non-impregnated mountain larch, palisades white-peeled, with slanted end-grain section (wood protection measure), Richter-Herkul rope, Ø > 20 mm, made of galvanised six-strand steel ropes, wrapped and glued with polyester yarn, with very good abrasion resistance, firm hold of the sheathing even in the event of punctual damage. Cardan joint, hot-dip galvanised, consists of two sintered metal plain bearings, allows free swinging in all directions. Profiled disc for optimum pressure distribution and protection against water ingress. Retractable two-part screws. Back and forth movements with sintered metal plain bearings, self-lubricating. Standard rope colour: red